xcubdfwbzwysfwbzucetxyzwxfwtdwezceyw

Log In
Sort By

Premium
Nearest
Recent
High $
Low $
Newest
Oldest
Loading your results...
A SET OF ROTORBLADES for your one-or two-seat gyroplane. Each blade is 8 in. X 13 ft.; they can provide a rotor diameter up to 30 ft. The blades are asymmetrical (8-H-12), extruded aluminum and unused. They come with the root and tip caps, the mounting plates and the leading-edge extrusions (already installed). Shipping cost is extra and paid directly to shipping company. Please note that there is only one set available of these blades. Please inquire if you need a rotorhub and/or a rotorhead.
$2,500
Great Value
Vortech, Inc.
Fallston, MD
A wide variety of rotorblades for homebuilt and experimental helicopters and gyroplanes, including direct replacements for RotorWays, Mosquitos, Mini-500s, RAF-2000, Bensen, Air Command, etc. Our line also includes tail rotorblades, windmill blades, drone blades, and rotors for other applications. Special sizes can be run.
Request Price
Call For Price
Vortech, Inc.
Fallston, MD
New Lord Shimmy Dampener SE-1076-1 for Beech Aircrafts listed below:Beech Aircraft Eligibility List:A36TC, B36TC, Bonanza 36, A36, G36, Bonanza 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, S35, V35, V35-TC, V35A, V35A-TC, V35B, V35B-TC, E33, E33A, E33C, F33, F33A, G33 Barron 55, A55, B55, C55, D55, E55, 56TC, A56TC, 58 Barron, 58TC 58P.This nose gear shimmy damper from LORD Corporation is FAA approved for many models of Beech Aircraft. The patented technology provides consistent damping without maintenance. Instead of using fluids to resist motion, the shimmy damper features a unique rubber formulation with a high-tech lubricant to absorb nose wheel vibration. Length: 5-1/2".• Reduced maintenance - No hydraulic fluid, eliminating periodic leaks and loss of damping. • Long life - Demonstrated performance in excess of 5,000 ground-air-ground duty cycles, expecting a product life of more than 10 years of usage on typical, high-use, single-engine piston airplanes.• Great value - Cost per hour up to 10X lower than current OEM offerings.• Consistent damping - From -30 degrees to +150 degrees F.• Proven design - The same patented technology has been used since 2000 on LORD shimmy dampers for Cessna aircraft.• Form, fit and function compatible with existing installation (one-for-one replacement).• FAA Approved Retails for $869-$900, asking $500 O.B.O.
$500
OBO
Private Seller
Greenville, MI
Rotorblades for your homebuilt helicopter or gyroplane. Main and tail blades available in various sizes and airfoils. Replacement blades for your RotorWay, Safari, etc. in aluminum or a composite-aluminum hybrid.
Request Price
Brand New
Call For Price
Brand New
Vortech, Inc.
Fallston, MD
SPECIAL SALE! Extruded aluminum NACA0012 rotorblades in bulk for homebuilt (experimental) helicopters. The rotorblades are brand new and all have an 8" chord. They come in 2 lengths: • 8" x 9'6" (23 sets—46 blades) and • 8" x 11'6" (2 sets—4 blades). The blades are for use on a variety of one- and two-seat homebuilt helicopters, including the A/W-95, the Mini-500, the RotorWay Scorpion and Exec, etc. They are formed as a single extrusion from 6063-T6 aluminum. Also included: 20 leading-edge spars, each 11'6" long and formed of 6061-T6 aluminum. The 18 spars are for 10 of the bladesets and they can easily be cut to any length. The blades are located in Kansas and can be picked up or shipped anywhere in the world. Offered only in bulk (not individually).
$34,000
New Listing
Vortech, Inc.
Fallston, MD
I have acquired this bell helicopter, taken a partial payment for a job and really dont know much about it..I know is was donated and used a show piece for children. Looks to be gutted of everything inside except gauges but have been told the tailpiece and blades hold value..this was it before it was taken apart to trailer home. If anyone is interested in parts or just educating me of what I have please helpLocked in san diego928-581-0475
$1,000
Make Offer
Private Seller
El Cajon, CA
(2) British Aerospace JS31 part number 31-5179-1 cargo/baggage pods for sale each priced @ $2500 plus shipping cost. It is unknown what year the pods were manufactured, but they were acquired in 2009. The pods are being sold as is, it will be the buyer’s responsibility to determine the airworthiness of the pod and to comply with all applicable federal regulations when using and installing parts on an aircraft. Seller assumes no liability. All sales are final.
$2,500
Private Seller
Easton, MD
Great prop for an experimental aircraft. Propeller was removed from an IO-540 Lycoming in a Rockwell Commander 114 in 2010 that had a total time of 2900 hrs. It was disassembled for inspection and never reassembled because it was replaced by a new 3-bladed prop. The prop is 78" in diameter and is variable pitch/constant speed. The Hartzell number is C2YK-1BF F8467-7R. It also comes with two nose spinners, one is polished aluminum and the other is painted, both in excellent condition. I would recommend replacing all seals, gaskets and paint. Asking $2000 O.B.O.
$2,000
OBO
Private Seller
Greenville, MI
Cylinders - B-A50222 - 6 (15.5lbs. ea.)Pistons - 6 (2.25lbs. ea.)Accessory Case with oil pump (7.25lbs.)Engine Case- (52lbs.)Sump - 5 hole (7lbs.)Rods (2lbs. ea.)Intake Manifolds (2.25lbs. ea.)Bendix Mag Gears (1lb. ea.)Cam Shaft (6lbs.)Cam Gear (1.75lbs.)Starter Gear (2lbs.) ALSO: Thru bolts, push rods, valves,counter balances, engine baffles, and valve lifters to go with respective parts of engine.
$3,395
Price drop
Vortech, Inc.
Fallston, MD